QuintezzDC_cover.
ADDENDUM MANUAL PAGE GB-GB-4, 6, 11 4.2 SETTING MENU The options ‘Ka’ and ‘KaN (Ka Narrow)’ are replaced by the following options: ‘Ka1’, ‘Ka2’, ‘Ka3’. 4.2.4 RADAR BAND Ka1, Ka2, Ka3 This option allows you to switch off the Radar Band ‘Ka1’, ‘Ka2’ and/or ‘Ka3’. Ka1 (upto 34.3), Ka2 (from 34.3 to 35.1 Ghz), Ka3 (from 35.1 to 35.7 Ghz). 6.2 RADAR FREQUENCIES Ka1: 34.0, 34.3 Ghz Ka 2: 34.3, 34.36, 34.7, 35.1 Ghz Ka 3: 35.5 Ghz ADDENDUM HANDLEIDING PAGINA NL-20, 22, 27 4.
ADDENDUM MANUAL DE INSTRUCCIONES PAGINA E-52, 54, 59 4.2 MENÚ DE AJUSTE Las opciones ‘Ka’ y ‘kaN (Ka Estrecho)’ son reemplazadas por las siguientes opciones: ‘Ka1’, ‘Ka2’, ‘Ka3’. 4.2.4 BANDE DE RADAR Ka1, Ka2, Ka3 Esta opción le permite apagar la Banda de Radar ‘Ka1’, ‘Ka2’ y/o ‘Ka3’. Ka1 (hasta 34.49), Ka2 (de 34.3 a 35.1 Ghz), Ka3 (de 35.1 a 35.7 Ghz). 6.2 FRECUENCIAS DEL RADAR Y DEL LÁSER Ka1: 34.0, 34.3 Ghz Ka 2: 34.3, 34.36, 34.7, 35.1 Ghz Ka 3: 35.5 Ghz ADDENDUM BENUTZERHANDBUCH SEITE D-68, 70, 75 4.
Illustration I 15 11 C 13 12 16 10 9 M Y 8 6 CM MY CY CMY K 7 Illustration II 1 2 3 4 5 14
TABLE OF CONTENTS INTRODUCTION ..........................................................................................................................................................................1 DESCRIPTION OF THE DRIVE CONTROL ........................................................................................................................................1 INSTALLATION IN THE CAR ..................................................................................................................
1.2 MEANING OF EACH PART IN THE BOX See illustration I 1. Setting button: To enter the menu options and activate the download mode 2. Save button: i. Allows the user to manually add new locations where from now on warnings will be given in driving mode. ii. Allows the user to manually delete locations. iii. The user’s preference for each option can be set in setting mode. 3. Volume – button: To decrease the volume. 4. Volume + button: To increase the volume. 5. Red button: i.
• • Mount the unit so that the control panel is plainly visible for the driver. Do not leave it in direct sunlight for long periods of time. 2.2 MOUNTING TYPES See Illustration II We have provided 2 types of mounting methods. 2.2.1 DASHBOARD MOUNTING The hook and loop fastener Velcro tape provided, may be used to mount your detector on a flat dashboard. The dashboard must be clean and dry for the fastener to adhere properly.
If the Radar / Laser Detector is installed, it will start working immediately. The GPS alarm will only be working after the connection to the satellites is established. ATTENTION: The first time the DRIVE CONTROL is switched ON, it can take about 15 minutes to catch the satellites. Obstacles in the direct environment and the moving of the car can extend the duration of the first connection to the satellites. The DRIVE CONTROL will stay connected with 4 to 12 satellites.
10. 11. 12. 13. 14. 15. 16. 17. SN 0 (visible when radar is off) ODO 0.0 AVG: 0 U: Kilo / Mile GMT: 0 U1 …….Lat ……….Lon Ver 03.1 DB: e.g. 9/11 Each submenu will be described in the following chapters. To scroll through the menu, press the SETTING button. To enter a selected menu, press the SETTING button. To save a selection, press the SAVE button. If no button is pressed within 3 seconds, the unit exits the menu. 4.2.
4.2.2 RADAR BAND: X/Ku This option allows you to switch off the Radar Band ‘X/Ku’. Press the VOL + or VOL – button to switch this Radar Band ON or OFF. To confirm this setting, press SAVE. 4.2.3 RADAR BAND: K This option allows you to switch off the Radar Band ‘K’. Press the VOL + or VOL – button to switch this Radar Band ON or OFF. To confirm this setting, press SAVE. 4.2.4.1 RADAR BAND: Ka / 4.2.4.2 RADAR BAND: Ka Narrow (Ka N) This option allows you to switch off the Radar Band ‘Ka’ / ‘Ka N’.
During moving, the speed of the car and the heading are shown. Comfort display setting: During moving and non-moving, the heading of the compass is shown in degrees. If you have set the RLogic function to ‘CITY’ (see chapter 4.2.1 ‘RLOGIC…’), the ‘C’ of City is also shown on the display. 4.2.7 BELL / EXTRA SOUND The following display appears once the bell / extra sound menu is accessed: This option allows you to partially switch off the sound.
First, you need to enter the first digit. You can set the digit with the VOL + and VOL – key. To confirm the digit, you need to press the red button. Once all 4 digits are confirmed, the Radar Detector will be switched on, or you will receive a message ‘SN Fail’. To make sure your secret code remains secret, we suggest that you remove the last 4 digits from the serial number label, and store the information in a safe place. 4.2.10 0.0 INDICATION When the product is not used, the display shows 0.0.
ALERT SCREENS OF THE DRIVE CONTROL The DRIVE CONTROL will show the following screen when you approach a speed camera. The following alert indicates a camera warning at a distance of 450 meter on the current road. While driving, the DRIVE CONTROL will give a warning sound when you approach a camera, a dangerous location, a track control section or a user data location. The sound of this warning depends on what you have set up for the ‘bell / extra sound’.
How to add a location? If you want to add a location manually, press the SAVE button at that location, while you are driving. The DRIVE CONTROL will confirm the saving of this location as indicated in the following display: (in this case the 3rd user location was saved). How to delete a location? If you want to delete a manually added location, press the SAVE button at the respective location. This needs to be done during the visual and audible alarm for this particular location.
6.1 HOW THE RADAR WORKS The actual process involved in determining a vehicle’s speed is basically a simple one. It involves directing a beam of microwave energy at an approaching target vehicle. A portion of this beam is reflected by the target and is received by the radar unit that originally transmitted the signal. The reflected signal is shifted in frequency by an amount proportional to the speed of the target vehicle. This phenomenon is known as the Doppler effect.
The DRIVE CONTROL is the perfect solution. This advanced GPS device signals overspeed, camera locations and offers additionally an electronic compass, trip time and an ODO-meter. You can activate the Radar/Laser detection update in countries where this is allowed. The Radar/Laser Detector can be set to switch off at speeds that are lower than 30 or 50 km/h to avoid false alarms. PC OPERATING FOR THE QUINTEZZ DRIVE CONTROL 7.1. INSTALLING �������������������������������� THE QUINTEZZ SOFTWARE 1.
7.2. DOWNLOAD DATABSE CAMERA LOCATIONS 1. Click on the icon ‘Drive Control Easy Update’, created during the installation of the Quintezz software (see step 1). 2. Go to www.quintezz.com and choose English as language. 3. Click on ‘Download Center’. 4. Click on ‘Accept’ to accept the Quintezz juridical statement. 5. Select the database of your choice. 6. Click on ‘Download’ to confirm your choice. 7. Save the file ‘DriveControl.mdb’ on your desktop. 8.
4. Click on ‘Database’ and select the file ‘DriveControl.mdb’ that was saved on your desktop. The software will now start downloading the database into your Drive Control. !!! Do not unplug the Drive Control until ‘ALL DONE’ is shown on your screen!!! 5. 6. Click on ‘Exit’.
MAINTENANCE, DIRECTIVES AND TIPS 8.1 REPLACING THE FUSE There is a fuse in the cigarette plug of the DRIVE CONTROL. To replace the fuse, you need to loosen the screw cap of the cigarette plug. Always make sure you replace the fuse with one of equal value. 8.2 ENVIRONMENT The DRIVE CONTROL is a very advanced GPS-system that is composed with high-quality components. Extreme low and high temperatures, heavy shocks, etc. should be avoided. Do not expose the DRIVE CONTROL to direct sunlight. 8.
• • • Excluded from any guarantee are consumable items which may need replacing due to normal wear and tear, such as batteries, ear cushions, decorative parts and other accessories. This limited guarantee gives you specific legal rights, and you may also have other rights which vary from country to country. Excluded from the guarantee are eg.: problems with your PC or Internet, damage to your car and fines. If there are any problems or uncertainties, you can ask your questions through info@quintezz.com.
QuintezzDC_backcover.
