Product Manual

QP-7.5 Quincy Compressor
2022201401, July 2014 2 3501 Wismann Lane, Quincy IL 62305-3116
ORDERING
REPLACEMENT PARTS
Prompt service can be rendered on repair parts orders
if the following information is given:
Item 1) the model number, record of change
number, & serial number.
Item 2) the exact part number needed. (Do not
order by item numbers.)
Item 3) the exact quantity needed.
Item 4) the preferred type of transportation.
QUIN-CIP LUBRICANT
Refer to the chart below to order Quin-Cip-D or
Quin-Cip lubricant from your local authorized Quincy
distributor.
CRANKCASE LUBRICANT
CAPACITY
Model Capacity
QP-7.5 1 qt. - 26 oz. (1.72 lit.)
SERIAL NUMBER
IDENTIFICATION
The unit serial number identification tag is located
on the air tank top plate. The basic compressor serial
number decal is located on the side of the crankcase
opposite the oil fill side. Fill in the numbers from
your compressor unit and basic compressor in the
corresponding spaces provided here, and reference
this page when ordering replacement parts.
All replacement parts are to be ordered through
an authorized Quincy distributor. Insist on genuine
Quincy parts only! Failure to do so may void warranty.
Unit Serial Number
Basic Serial Number
DANGER !
WARNING !
CAUTION !
CAUTION !
Refer to the QP Industrial / Air Master Series instruction
manual for vital lubrication information.
Follow all safety precautions outlined in the QP Industrial /
Air Master Series instruction manual.
Do not operate this compressor without a totally enclosed
belt guard or any other required safety equipment.
Air used for breathing or food processing must meet OSHA
1910.134 or FDA 21 CFR 178.3570 regulations. Failure to
do so may cause severe injury or death.
Quart 115468Q
Case (12 Qts.) 115468C
Quart 112541Q032
Case (12 Qts.) 112541C032
Quart 112542Q068
Case (12 Qts.) 112542C068
Quart 112543Q100
Case (12 Qts.) 112543C100
SAE 30 (ISO 100)
Quin-Cip-D
Lubricant
(synthetic)
Quin-Cip Lubricant
SAE 30 (ISO 100)
SAE 20 (ISO 68)
SAE 10W (ISO 32)