Manualshelf

Product Manual

ManualsBrandsQuincy Compressor Manuals50 CFM + Above Air CompressorsQuincy QGS Rotary Screw Air Compressor with Dryer — 50 HP, 230/460 Volt, 3 Phase, 208 CFM, No Tank
41424344454647484950
Cod. 9828093011 00 - Edition 03/2015 - 45
ENGLISH
20.0 STARTING UP
BEFORE PERFORMING ANY OPERATION ON THE MACHINE, ENSURE THAT THE ELECTRIC POWER SUPPLY HAS
BEEN DISCONNECTED.
20.1 PREPARE FOR START
20.2 Preliminary checks
Check the level Ref. 1 Fig. 24; when delivered, the machine is filled with oil; if the oil level is not as intended, top up with original
oil.
If
unit is installed more than 3 months after factory inspection: lubricate the screw element before start.
According to below procedure:
- Remove the pipe Ref. 2 Fig. 24 by loosening the clamp screw.
- Pour a little oil into the inlet valve.
- Reassemble the pipe Ref. 2 Fig. 24
If more than 6 months elapsed between factory inspection and installation, please contact the service centre.
FIG.
24
2
OIL
1