Product Manual
38
Edition 03/2015 Cod. 9828093011
00-
ENGLISH
BEFORE PERFORMING ANY MAINTENANCE IT IS MANDATORY TO STOP THE MACHINE AND DISCONNECT IT FROM
THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK.
15.6 CLEANING THE AIR INLET FILTER OR REPLACING THE FILTER
- Switch off the machine with pushbutton Ref. 1 Fig. 17: in this way the compressor will not stop instantly.
- Turn on the differential supply switch, Ref. 3 (on the screw-compressor) and Ref. 3A (on the dryer if fitted) Fig. 17.
HOT PARTS INSIDE
- Remove the panel Ref. 2 Fig. 18.
- Remove the cover Ref. 7 Fig. 19.
- Remove the filter Ref. 8 Fig. 19.
AVOID DROPPING FOREIGN BODIES INTO THE INLET DUCT.
- Clean the filter with a jet of air, working from inside to outside, DO NOT USE WATER OR SOLVENTS. Alternatively, fit a new filter.
- Clean the disk on which the filter rests with a clean cloth.
- Fit the filter and the cover.
- If necessary, dispose of the old filter in conformity with the local regulations in force.
- Close the panel Ref. 2 Fig. 18.
FIG.
19
7
8