Product Manual

Cod. 9828093011 00 - Edition 03/2015 - 35
ENGLISH
15.0 ORDINARY MAINTENANCE TO BE DONE BY THE USER



BEFORE PERFORMING ANY MAINTENANCE IT IS MANDATORY TO STOP THE MACHINE AND DISCONNECT IT FROM
THE POWER MAINS AND FROM THE COMPRESSED AIR DISTRIBUTION NETWORK.

The maintenance jobs described in this chapter may be carried out by the user.
The more complex maintenance jobs which require professionally skilled personnel are listed in the chaper on GENERAL ROUTINE
MAINTENANCE. (See Chap. 21.0)
15.1 GENERAL INFORMATION
15.2 MAINTENANCE PROGRAMME
 OPERATIONS THAT MAY BE CARRIED OUT BY THE USER
 OPERATIONS THAT REQUIRE SKILLED PERSONNEL; THESE OPERATIONS ARE ILLUSTRATED IN PART B OF THIS
MANUAL.

These maintenance intervals are recommended for work environments that are not dusty and are will ventilated. For particularly dusty
environments, double the frequency of controls.



Every Day (after use)

 Check automatic condensation drain (dryer)

Every 50 working hours

 Drain condensate from the oil tank
 Check the oil level
 Clean the filter of the automatic condensate drain (dryer)

Every 500 hours

 Replace oil filter (at first 500 hrs)
 Tighten the screws fixing the electric cables (at first 500 hrs)
 Clean the air inlet filter
 Clean the condenser heat exchanger (unit with dryer)
 Clean the inlet filtration panels

Every 2000 hours

 Replace the inlet air filter
  Replace the oil filter
  Retighten all power cable connections
  Safety temperature test
  Maintenance kit of the automatic condensate drain (dryer)
 
Oil Fluid sample

Every 4000 hours

 Clean the finned surface of the air-oil cooler
  Replace the oil separator filter

Every 8000 hours

  Intake service kit
  Check status of oil return valve and oil pipes
  MPV Service kit
  Replace the oil *

*ThecompressormustbemaintainedwithQuinSyn‐Plus(8,000hourmaximum),QuinSyn‐XP(12,000hour
maximum)orQuinSyn‐Ffoodgrade(6,000hourmaximum).Maximumfluidchangeintervalsarenotedperfluid.
Actualfluidchangeintervalistobedeterminedbyfluidsamplingreport,nottoexceedmaximumfluid
change
interval.Fluidsamplesmustbetakenevery2,000hoursorasdirectedbytheanalysisreport.For lightusage
units,afluidsamplemustbetakenaminimum,ofeverysix(6)months,beginningatstart‐up.