Product Manual

16 Edition 03/2015 Cod. 9828093011 00-
ENGLISH



Display

The display (3) shows :
- The compressor status by means of pictographs.
- The air outlet pressure.
- The actual temperature of the compressor element outlet.
- The actual dew-point temperature in case of compressor equipped with dryer..
The display also shows all measured and programmed parameters.

Pittographs used on the screen (Tab. B)

Ref. Pictographs Description

1 )

Compressor on status load.

2)

Compressor status unload.

3)

Motor stopped.

4)

When the compressor is stopped, the icon stands still.
When the compressor is running, the icon is rotating.

5)

Element outlet temperature.

6)

Dew-point (dryer equipped version).

7)

Motor overload or phase sequence incorrect or outlet element overtemperature detected
by temperature switch

8)

Emergency stop activated.

9)

Pictograph: service.

10)

Remote start / stop

11)

LAN control or network setting.

12)

Automatic restart after voltage failure is active

13)

Timer

Main screen
When the voltage is switched on, the main screen is shown automatically, indicating the operation status of the compressor and the outlet
temperature.

example:

The display is showing that the compressor is running loaded (when the horizontal arrow is blinking) and the outlet pressure is 6.8bar.
Consult the service dept. if <test> appears on the display.