Manualshelf

Product Manual

ManualsBrandsQuincy Compressor Manuals50 CFM + Above Air CompressorsQuincy QGS Rotary Screw Air Compressor with Dryer — 50 HP, 230/460 Volt, 3 Phase, 208 CFM, No Tank
11121314151617181920
Cod. 9828093011 00 - Edition 03/2015 - 11
ENGLISH
12.3 CONNECTION TO THE COMPRESSED AIR NETWORK
Isolation (ball) valve Ref. 1 between the machine and the compressed air network so that the compressor may be isolated during
maintenance operations (see figure 12 ) .
PIPES, FITTINGS AND CONNECTIONS USED FOR THE CONNECTION OF THE
ELECTROCOMPRESSOR
TO THE
COMPRESSED AIR NETWORK MUST BE SUITABLE TO THE USE ACCORDING TO THE INSTRUCTIONS OF THE
REGULATIONS IN FORCE IN THE COUNTRY OF USE.
THE COMPRESSOR MUST BE CONNECTED TO AN AIR TANK
EQUIPED WITH SAFETY VALVE ACCORDING TO LOCAL
PRESSURE EQUIPMENT REGULATIONS.
FIG. 12
1
ALWAYS USE A
FLEXIBLE PIPE
2
The automatic condensate drain Ref. 2 Fig. 12, are led outside the machine with a flexible pipe that may be inspected. Drainage must
comply with the local regulations in force.
THE MANUFACTURER CANNOT ACCEPT LIABILITY, FOR ANY DAMAGE AND OR FAILURE CAUSED BY FAILURE TO
COMPLY WITH THESE INSTRUCTIONS.
12.4 STARTING UP
See part B of this manual, Chapter 20.0