MSDS

and apron should be worn if exposure is severe. Remove contaminated clothing and launder before
reuse.
Exposure Limits: Consult local authorities for acceptable exposure limits.
SECTION IX - PHYSICAL/CHEMICAL CHARACTERISTICS
Appearance: Milky white liquid Specific Gravity: 1.0 to 1.2
Melting Point: 32
o
F ( 0
o
C) Boiling Point: >212
o
F ( 100
o
C)
Vapor Pressure: 17 mm Hg @ 68
o
F (20
o
C) Vapor Density: <1(water)
Volatiles: Approximately 22% Odor: vinyl acetate odor
Evaporation Rate: <1(water)
Solubility in Water: Water miscible. Dilution with water generally will lower dispersion stability.
SECTION X - REACTIVITY DATA
Stability: Stable.
Incompatibility (Materials to Avoid): Strong oxidizers, materials that react with water
Hazardous Decomposition or By-products: None
Hazardous Polymerization: Will Not Occur.
Condition to Avoid: Protect from temperatures below 40
o
F to preserve product utility.
SECTION XI – TOXICOLOGICAL INFORMATION
Routes of Entry: Inhalation, Ingestion
Toxicity to Animals:
LD50: Not Available
LC50: Not Available
Chronic Effects on Humans: Not established
Special Remarks on Toxicity: Unlikely to cause harmful effects under recommended conditions of
handling and use
SECTION XII – ECOLOGICAL INFORMATION
Ecotoxicity: Not Available
BOD5 and COD: Not Available
Products of Biodegradation: Not available
Toxicity of the Products of Biodegradation: Not available
Special Remarks on the Products of Biodegradation: Ingress to waterways may cause
persistent milky turbidity.
SECTION XIII – DISPOSAL CONSIDERATIONS
Waste Disposal Method: Disposal should be in accordance with local, state or national legislation.
This product is not classified as a hazardous waste under the authority of the RCRA (40CFR 261) or
CERCLA (40CFR 117&302).
SECTION XIV – TRANSPORT INFORMATION
DOT/UN Shipping Name: Non-regulated
DOT Hazard Class: Non-regulated