Specification



• Apply at a uniform thickness to obtain a coverage of 150 – 200
ft
2
/gal (3.7 - 4.9 m
2
/L), depending on the texture of the surface
PRECAUTIONS
• Do not apply more than the recommended amount.
• Do not leave puddles. If puddles form on textured surfaces, use a
brush to remove them.
• Clean application tools, particularly sprayer nozzles, with water
immediately after use.
• Wear impervious gloves and prevent skin contact. Remove any
material from skin or clothes promptly, while wet, with soap and
water.
• When used as a curing compound, do not apply to finished concrete
surface too quickly. Under typical conditions, the proper application
time will be 4-6 hours after placing.
• When used as a curing compound in hot, windy weather, the proper
application time will be reduced to as little as 2-3 hours after placing.
Wait at least 10-12 hours in cool weather. Apply after finishing and
when surface water has been reabsorbed.
• Do not apply if rain, heavy dew or temperatures below 50
o
F (10
o
C)
are expected within 24 hours.
• Do not cover surfaces treated with QUIKRETE
®
Acrylic Concrete
Cure & Seal for at least 24 hours after application.
• Solvents and cleaners containing solvents, such as pine or citrus will
discolor.
WARRANTY
The QUIKRETE
®
Companies warrant this product to be of
merchantable quality when used or applied in accordance with the
instructions herein. The product is not warranted as suitable for any
purpose or use other than the general purpose for which it is
intended. Liability under this warranty is limited to the replacement of
its product (as purchased) found to be defective, or at the shipping
companies’ option, to refund the purchase price. In the event of a
claim under this warranty, notice must be given to The QUIKRETE
®
Companies in writing. This limited warranty is issued and accepted in
lieu of all other express warranties and expressly excludes liability for
consequential damages.
The QUIKRETE
®
Companies
One Securities Centre
3490 Piedmont Rd., NE, Suite 1300, Atlanta, GA 30305
[phone] • Fax: [phone]

* Refer to www.quikrete.com for the most current technical data and MSDS