SDS

ONE SECURITIES CENTRE, 3490 PIEDMONT ROAD, SUITE 1300, ATLANTA, GA 30305 SDS F5B TEL [phone] WWW.QUIKRETE.COM
Page 8 of 8
MANUFACTURER DISCLAIMER: This SDS to the best of our knowledge conforms to the
requirements of OSHA 29 CFR 1910.1200, 91/155/EEC and summarizes the health and safety
hazard information and general guidance on how to safety handle the material at the date of issue.
Each user must review the SDS in the context of how the product will be handled and used in the
workplace. If clarification or further information is needed to ensure that an appropriate risk
assessment can be made, the user should contact this company. Responsibility for the product sold
is subject to our standard terms and conditions, a copy if which is available upon request. This
company warrants only that its products meet the specifications stated in the sales contract. Typical
properties, where stated, are to be considered as representative of current production and should
not be treated as specifications. While all the information presented in this document is believed to
be reliable and to represent the best available data on these products, NO GUARANTEE,
WARRANTY, OR REPRESENTATION IS MADE, INTENDED, OR IMPLIED AS TO THE
CORRECTNESS, OR SUFFICIENCY OF ANY INFORMATION, OR AS TO THE
MERCHANTABILITY OR SUITABILITY OR FITNESS OF ANY CHEMICAL COMPOUNDS OR
OTHER PRODUCTS FOR ANY PARTICULAR USE OR PURPOSE, OR THAT ANY CHEMICAL
COMPOUNDS OR OTHER PRODUCTS OR THE USE THEREOF ARE NOT SUBJECT TO A
CLAIM BY A THIRD PARTY FOR INFRINGEMENT OF ANY PATENT OR OTHER INTELLECTUAL
PROPERTY RIGHT. Some of the information presented and conclusions drawn herein are from
sources other than direct test data on the product itself. Liability by this company for all claims,
whether arising out of breach of warranty, negligence, strict liability, or otherwise, is limited to the
purchase price of the material. Products may be toxic and require special precautions in handling.
For all products listed, the user should obtain detailed information on toxicity, together with the
proper shipping, handling and storage procedures, and comply with all applicable safety and
environmental standards. Toxicity and risk characteristics of chemical compounds and other
products may differ when used with other materials or in a manufacturing or other process. Those
risk characteristics should be determined by the user and made known to handlers, processors, and
end users.
End of SDS