Installation Guide
mechanically. Dispose of contents & container while preventing
contact by others and in accordance with all regulations.
CLEANUP
Remove from tools IMMEDIATELY. Cured material can be removed
only mechanically. Uncured material can be removed from tools and
surfaces with solvents such as: WD40, citrus adhesive removers,
xylene, rubbing alcohol, or nail polish remover. Use these solvents
cautiously; they are flammable.
PRECAUTIONS
Do not thin with solvents, as this will prevent cure. Do not use for
repairing cracks that are subject to movement until the cause of the
cracking has been addressed. Do not apply in areas where service
temperatures may reach 140 ºF (60 ºC) or higher. Do not attempt to
force material through a mixing nozzle that contains hardened
material; material may splatter. If a leak should develop, discontinue
use immediately. Proceed with new cartridge and nozzle.
Shelf Life: 18 months at 40 ºF (4 ºC) to 90 ºF (32 ºC) unopened in dry
storage.
Storage Temperature: 40 ºF (4 ºC) to 90 ºF (32 ºC).
Application Temperature: 40 ºF (4 ºC) to 100 ºF (38 ºC).
When temperatures are below 70 ºF (21 ºC), conditioning the
cartridge to 70 ºF (21 ºC) to 75 ºF (24 ºC) prior to application will
improve handling and curing.
Meets VOC requirements in all locations; VOC 47 g/L per
EPA Method 24
WARRANTY
The QUIKRETE
®
Companies, LLC warrant this product to be of
merchantable quality when used or applied in accordance with the
instructions herein. The product is not warranted as suitable for any
purpose or use other than the general purpose for which it is
intended. Liability under this warranty is limited to the replacement of
its product (as purchased) found to be defective, or at the shipping
companies’ option, to refund the purchase price. In the event of a
claim under this warranty, notice must be given to The QUIKRETE®
Companies, LLC in writing. THIS LIMITED WARRANTY IS ISSUED
AND ACCEPTED IN LIEU OF ALL OTHER EXPRESS
WARRANTIES AND EXPRESSLY EXCLUDES LIABILITY FOR
CONSEQUENTIAL DAMAGES.
The QUIKRETE
®
Companies, LLC
One Securities Centre
3490 Piedmont Rd., NE, Suite 1300, Atlanta, GA 30305
(404) 634-9100 • Fax: (404) 842-1425
* Refer to www.quikrete.com for the most current technical data, SDS, and guide specifications


