Specification



Note - QUIKRETE
®
One Coat FRS Concentrated requires 1.5 gal
(5.7 L) of Concrete Acrylic Fortifier per bag along with the appropriate
amount of stucco sand.
APPLICATION
Apply in accordance with instructions for product being modified.
CURING
Under normal conditions, do not moist cure since air is essential in
the curing of Concrete Acrylic Fortifier mixes; however, under extreme
conditions of wind and heat, moist curing may be required for the first
24 hours.
PRECAUTIONS
• QUIKRETE
®
Concrete Acrylic Fortifier is not to be used with
polymer modified products
• Do not use with products containing air entrainment such as mortar
mixes made from masonry cement
• Do not use in combination with Concrete Bonding Adhesive (#9902)
• Store in a cool, dry place and protect product from freezing
• Do not place finishes or patches at temperatures below 50 degrees
F (10 degrees C), or when temperatures are expected to fall below 40
degrees F (4 degrees C) within 24 hours
Note - It is extremely important that mixing proportions and directions
are followed explicitly. Any deviations from mixing proportions that
result in lesser quantities of Concrete Acrylic Fortifier could cause
inadequate adhesion and performance.
WARRANTY
The QUIKRETE
®
Companies warrant this product to be of
merchantable quality when used or applied in accordance with the
instructions herein. The product is not warranted as suitable for any
purpose or use other than the general purpose for which it is
intended. Liability under this warranty is limited to the replacement of
its product (as purchased) found to be defective, or at the shipping
companies’ option, to refund the purchase price. In the event of a
claim under this warranty, notice must be given to The QUIKRETE
®
Companies in writing. This limited warranty is issued and accepted in
lieu of all other express warranties and expressly excludes liability for
consequential damages.
The QUIKRETE
®
Companies
One Securities Centre
3490 Piedmont Rd., NE, Suite 1300, Atlanta, GA 30305
[phone] • Fax: [phone]

* Refer to www.quikrete.com for the most current technical data, MSDS, and guide specifications
