User Guide



QUIKRETE
®
Concrete Resurfacer (#1131-40) or QUIKRETE
®
Sand
Mix (#1103) with QUIKRETE
®
Concrete Acrylic Fortifier (#8610)
added
• Apply at thick trowelable consistency only. Do not use more than the
recommended amount of water. Increased water content may result
in excessive shrinkage and cracking
• For deeper repairs on vertical surfaces, it may be necessary to apply
in layers of 1/4" (6.4 mm)
• Do not use when temperatures are expected to drop below 40
degrees F (4 degrees C) in the first 24 hours
• In hot, dry or windy conditions, damp cure for at least 24 hours
• Not for use in cracks less than 1/8" (3.2 mm) wide and not to be
used in expansion or control joints
• Do not apply to oil contaminated or previously painted surfaces
• Mix only with water. Do not use with Concrete Acrylic Fortifier,
Concrete Bonding Adhesive or other bonding agents
WARRANTY
The QUIKRETE
®
Companies warrant this product to be of
merchantable quality when used or applied in accordance with the
instructions herein. The product is not warranted as suitable for any
purpose or use other than the general purpose for which it is
intended. Liability under this warranty is limited to the replacement of
its product (as purchased) found to be defective, or at the shipping
companies’ option, to refund the purchase price. In the event of a
claim under this warranty, notice must be given to The QUIKRETE®
Companies in writing. This limited warranty is issued and accepted in
lieu of all other express warranties and expressly excludes liability for
consequential damages.
The QUIKRETE
®
Companies
One Securities Centre
3490 Piedmont Rd., NE, Suite 1300; Atlanta, GA 30305
[phone] • Fax: [phone]

* Refer to www.quikrete.com for the most current technical data, SDS, and guide specifications
Revised 08 September 2016
