SDS

ONE SECURITIES CENTRE, 3490 PIEDMONT ROAD, SUITE 1300, ATLANTA, GA 30305 SDS D2 TEL [phone] WWW.QUIKRETE.COM
Page 3 of 12
product from body and thoroughly rinse with water. If you experience or suspect a cement burn or
inflammation you should immediately see a health care professional.
Skin burns and irritation may be caused by brief exposure, though often are caused by extended
exposure of 15 minutes, an hour, or longer. Interaction of Portland cement with water or sweat
releases a caustic solution which produces the burns or irritation. Any extended exposure should be
treated as though a burn has occurred until determined otherwise.
Skin contact with Portland cement can also cause inflammation of the skin, referred to as dermatitis.
Signs and symptoms of dermatitis can include itching, redness, swelling, blisters, scaling, and other
changes in the normal condition of the skin. Signs and symptoms of burns include the above and
whitening, yellowing, blackening, peeling or cracking of skin.
The Portland cement in this product may cause allergic contact dermatitis in sensitized individuals.
This overreaction of the immune system can lead to severe inflammation. Sensitization may result
from a single exposure to the low levels of Cr (VI) in Portland cement or repeated exposures over
months or years. Sensitization is long lasting and, after sensitization, even very small quantities can
trigger the dermatitis. Sensitization is uncommon. Individuals who experience skin problems,
including seemingly minor ones, are advised to seek medical attention.
2.3a HNOC – Hazards not otherwise classified: Not applicable
2.3b Unknown Acute Toxicity: None
2.3C WHMIS Classification
Class D2B – Skin/Eye Irritant
Class D2A – Chronic Toxic Effects – Carcinogen
Class E – Corrosive Material
2.3d Label Elements According To WHMIS
Hazard Symbols
Signal Word
DANGER!
SECTION III - HAZARDOUS INGREDIENTS/IDENTITY INFORMATION
Hazardous Components CAS No. % by Weight