Installation Guide

QuietWarmth Radiant Heat Film for Floating Floors is a unique heating system that is installed below floating
flooring materials to create warm, comfortable floors and provide supplementary or primary heat. QuietWarmth
consists of low heat density film heating mat sets that cover the majority of the open floor area to ensure optimum
thermal comfort. QuietWarmth comes as standard kits which may be modified and cut to shorter lengths in
accordance with instructions or is available as custom orders. Warranted to be free of defects in manufacture for
a period of 25 years.
The QuietWarmth
System can be installed on any standard sub-floor, so long as it is flat, smooth, and free from
protrusions such a nails, screws, etc. When specifying as primary heat, a heat loss calculation must be performed
to determine how many watts are required to heat the room or space.
For more information go to www.QuietWarmth.com
SECTION 1. Introduction
Installation & Owner’s Guide QW-FLOAT 1
Features:
This manual is organized into five sections:
• Introduction • Designing the Installation
• Installation • Inspection and Testing • Operation
• QuietWarmth must be installed on a dedicated 20 amp
circuit. Do not connect lights, outlets, or any other
electrical device to any branch circuit used with the
QuietWarmth Floating Floor Heat mats.
• All wiring, fuses and/or circuit breakers must conform to
National Electrical Code requirements.
• Technical Hotline: 1-888-WARM PAD
• Website: www.QuietWarmth.com
• Email: [e-mail]
How to Use This Manual
Before You Begin
For Additional Help
• 12 watts per square foot
• 0.016” thick
• Easy to install
• Available in 18” and 36” widths in standard
kit lengths or custom lengths
• 120V or 240V
• Thermostat controlled
• Warranted to be free of defects in
manufacture for a period of 25 years