Product Brochure

ELECTRIC RADIANT FLOOR HEATING SYSTEM
Radiant Heat Film
for Floating Floors
888.379.9695
www.QuietWarmth.com
2
1
A D V A N T A G E S
E N V I R O N M E N T A L A T T R I B U T E S
• LEED Compliant for: EA Prerequisite 2, EA Credit 1, MR Credit2.1, MR Credit 2.2, MR Credit 5.1, EQ Prerequisite 1, EQ Credit7.1, EQ
Credit 3.1, EQ Credit 3.2, ID Credit 1
• 99.9% of energy is turned into heat with no parasitic loss.
A P P R O V E D F L O O R C O V E R I N G M A T E R I A L S
Approved floor coverings for Radiant Heat Film: All Floating Floors • Floating tiles • Laminate
Engineered Wood • Luxury Vinyl Flooring • Cork & Bamboo
Approved for Peel & Stick Radiant Heat for Tile : Ceramic tile • Porcelain tile • Natural Stone Tile
* Refer to Floor Covering Manufacturer’s specifications for compatibility of their product over any radiant heat before installation.
QuietWarmth vs. Other Electric Floor Systems
• There is no easier radiant floor heating system to install.
• Will warm the floor and depending on performed heat loss calculations, QuietWarmth can warm the entire room when it is install
in at least 80% of the room’s floor.
• Minimal thickness profile. Ultra-thin (less than .016”) heated panels keeps same floor heights through room transitions.
• Provides uniform heat. Your floor is heated uniformly with no gaps and the radiant heat is dispersed evenly throughout the
room.
• Quiets your floor when used in combination with QuietWalk underlayment, you achieve a superior sound rating: IIC 71 & STC 67
• Factory Attached Lead Wires. 15’ lead wires are connected to one end of each mat for easy routing and final connecting to the
thermostat.
• Safety certified by ETL in compliance with UL Standards for radiant flooring in the USA and Canada.
• Costs less to operate. Even heat distribution allows the QuietWarmth systems to cycle quicker resulting in less energy
consumption.
QuietWarmth
vs. Hydronic (water)
• Maintenance free. No mechanical heaters to heat the water and pumps to move the water. No potential maintenance issues to
worry about.
• Even heat distribution. Water near the end of the system has cooled compared to water at the beginning of the system.
• More efficient. Water systems must heat the water, then move the water by pumping it through pipes. With Floating Floor Heat,
all the electric power is used to heat the floor.
• Does not raise the floor. Most hydronic systems raise the floorlevel by as much as 1½ inches to make room for the water pipes.
• Simpler, lower cost installation. No water heaters, pumps, manifolds tubing and other mechanical parts.
QuietWarmth vs. Electric Baseboard
• More efficient and more even heat distribution. Baseboard heating is located at the room perimeter and overheats the outside of
the room. It does not warm the floor or your feet.
• Safer. Baseboard heating can be hot to the touch.
• Better appearance. Baseboard heaters are unsightly while Floating Floor Heat is not visible after installation.
REV: 01-20