Installation Guide

Complete the Installation

1. Install the ﬁnished ﬂooring according to the manufacturer’s instructions.

2. Retest the mats to ensure that the mats have not been damaged during the installation process. If they have

been damaged, follow guidelines noted to remedy the situation.

3. Install Underlayment.

For all ﬂoors, install a suitable underlayment such as QuietWalk, QuietWalk Plus, or QuietWalk LV underlayment

over the subﬂoor and over any vapor barriers that were needed for installation over concrete or at below grade.

Place Caution Stickers

Apply warning stickers provided with mats in appropriate locations, as shown below. these labels are an integral

part of this heating system and must be installed for warranty to be in force.

4. Inspection and Testing Continued

Installation & Owner’s Guide 16

Install baseboards or trim around the perimeter of the room. This ensures that the

oor will not lift, exposing the mats. The ooring manufacturer’s instructions will have

information about installing the baseboard or trim to allow the oor to oat properly.

NOTE: