Installation Guide

20
QUIETCOOLSYSTEMS.COM
7. Feed the 2 wire Romex from your power source into the handy box. Tie the remaining black wires
together. Tie the remaining white common wires together. Tie the bare copper wires and the two
green ground wires together. (see Figure G on page 20)
8. Open up the handy box on the second motorhead. Unscrew the green ground wire and detach the
green ground wire from the power cord. Remove the power cord. Reattch the green ground wire to
the handy box. Cut your green ground wire in half and strip both sides.
9. Feed the 2-wire Romex from your switch into the handy box. Tie the blue & black wire together for high
speed.
10. Feed the 2 wire Romex from your power source into the handy box. Tie the remaining black wires
together. Tie the remaining white common wires together. Tie the bare copper wires and the two
green ground wires together. (see Figure G on page 20)