Installation Guide

QUIETCOOLSYSTEMS.COM

3. From below, place the cut-out template on the ceiling

at each location, making sure that you have at least

2 inches of clearance all around it. While holding the

template in place, mark its outline with a pencil.

NOTE: Repeat these steps at each location.

4. Using a drywall saw or similar device, cut out the hole

in the ceiling.

NOTE: Repeat these steps at each location.

5. Open and unpack each QuietCool fan. Take the main

assembly, which includes the motor housing, damper

box, and duct into the attic through the crawl hole

and move into position near the ceiling cut-out hole.