Instructions / Assembly

1-888-QUIETCOOL
16
7. Begin wiring the your fan by opening up the handy box. Take off the wire nuts within the handy
box. Detach the green ground wire from the power cord. Remove the power cord. Re-attach the
ground screw and wire to the handy box. Cut your green ground wire in half and strip both
sides. (see Figure 4.2B or Figure 4.2C)
8. Feed the 2 wire Romex from your timer into the handy box. Feed the 2 wire Romex from your
power source into the handy box.
ES-2250 Wiring (see Figure 4.2B)
Feed the 2 wire Romex from your switch into the handy box. Tape the white wire on this end of
the Romex. Tie the yellow & black wire together for high speed. Tie the red and taped white wire
together for low speed.
Power
Timer
Tie All Ground & Bare Copper Wires Together
Whole House Fan
14-2 Wire
14-2 Wire
Switch
14-2 Wire
Low Speed
High Speed
White Common Wires Together
Black Wires Together
White - Marked w/ Tape
Black
Figure 4.2B
ES-3100/4700/5400/6000/7000 Wiring (see Figure 4.2C)
Feed the 2 wire Romex from your switch into the handy box. Tape the white wire on this end of
the Romex. Tie the blue & black wire together for high speed. Tie the red and taped white wire
together for low speed.
10. Tie the three remaining black wires together. Tie the three remaining white common wires
together. Tie the three bare copper wires and the two green ground wires together.
11. Carefully reinstall the handy box cover.
Power
Timer
Tie All Ground & Bare Copper Wires Together
Whole House Fan
14-2 Wire
14-2 Wire
Switch
14-2 Wire
Low Speed
High Speed
White Common Wires Together
Black Wires Together
White - Marked w/ Tape
Black
Figure 4.2C