Installation Instructions

18
QUIETCOOLSYSTEMS.COM
12. Begin wiring the fan by opening up the handy box. Take off the wire nuts within the handy box. Detach
the green ground wire from the power cord. Remove the power cord. Re-attach the ground screw
and wire to the handy box. Cut your green ground wire in half and strip both sides. (see Figure E)
13. Feed the 2 wire Romex from your switch into the handy box. Tape the white wire on this end of the
Romex. Tie the blue & black wire together for high speed. Tie the red and taped white wire together for
low speed.
14. Feed the 2 wire Romex from your timer into the handy box. Feed the 2 wire Romex from your power
source into the handy box.
15. Tie the three remaining black wires together. Tie the three remaining white common wires together. Tie
the three bare copper wires and the two green ground wires together.
16. Carefully reinstall the handy box cover.
Power
Timer
Tie All Ground & Bare Copper Wires Together
Whole House Fan
14-2 Wire
14-2 Wire
Switch
14-2 Wire
Low Speed
High Speed
White Common Wires Together
Black Wires Together
White - Marked w/ Tape
Black
Power
Timer
Tie All Ground & Bare Copper Wires Together
Whole House Fan
14-2 Wire
14-2 Wire
Switch
14-2 Wire
Low Speed
High Speed
White Common Wires Together
Black Wires Together
White - Marked w/ Tape
Black
Figure E