Installation Guide

QUIETCOOLSYSTEMS.COM

7. Feed the 2 wire Romex into the handy box. Using the included wire nuts, tie the black wires together for high

speed. Tie the remaining white neutral wires together. Tie your bare copper wires and green ground wires

together. Carefully reinstall the handy box cover.

8. Move to the second motor head. Open up the handy box and take off all the wire nuts. Unscrew the green

ground wire and detach the green ground wire from the power cord. Remove the power cord. Reattach the

green ground wire to the handy box. Cut your green ground wire in half and strip both sides. (see Figure F)

9. Feed the 2 wire Romex into the handy box. Using the included wire nuts, tie the black wires together for high

speed. Tie the remaining white neutral wires together. Tie your bare copper wires and green ground wires

together. Carefully reinstall the handy box cover.

Switch

Tie All Ground & Bare Copper Wires Together

All Black Wires Together

All White Common Wires Together

Whole House Fan