Installation Guide

15
1-888-QUIETCOOL
3-2 Two Speed Wiring (for ES-4700 and ES-5400)
1. For this installation, you will need (3) 2 wire Romex, an 8 Hour Timer, and a HIGH-LOW-OFF Switch.
2. Using your first 2 wire Romex, tape the white common wire because we are going to use it for low speed.
Attach the white wire to the top gold screw on the right of the switch. Then, attach the black wire to the
bottom gold screw. (see Figure C)
3. With a piece of bare copper wire, attach it to the green ground screw on the switch.
4. Using the second 2 wire romex that’s going to your timer, use one of the supplied wire nuts to tie the
black wire to the black wire on the timer. Tie the white wire from the 2 wire Romex to the white wire on
the timer.
5. Using a wire nut, tie all bare copper wires together with the green ground wire on the timer.
14-2 Wire
Power Source
Black Wires
Together
Red Switch Leg
Tie White Common Wires
Together
Taped White Low Speed
Whole House Fans
Tie All Ground & Bare
Copper Wires Together
14-2 Wire
8 HOUR
4 HOUR
2 HOUR
1 HOUR
HOLD
Black High Speed
High
OFF
Low
14-2 Wire
CONSTANT POWER REQUIRED
14-2 Wire
Power Source
Black Wires
Together
Red Switch Leg
Tie White Common Wires
Together
Taped White Low Speed
Whole House Fans
Tie All Ground & Bare
Copper Wires Together
14-2 Wire
8 HOUR
4 HOUR
2 HOUR
1 HOUR
HOLD
Black High Speed
High
OFF
Low
14-2 Wire
CONSTANT POWER REQUIRED
Figure C