Installation Guide

1-888-QUIETCOOL

6. Start by wiring the first motor head. Open up the handy box and take off all the wire nuts. Unscrew the

green ground wire and detach the green ground wire from the power cord. Remove the power cord.

Reattch the green ground wire to the handy box. Cut your green ground wire in half and strip both

sides. (see Figure F)

7. Feed the 2 wire Romex into the handy box. Using the included wire nuts, tie the black wires together

for high speed. Tie the remaining white neutral wires together. Tie your bare copper wires and green

ground wires together. Carefully reinstall the handy box cover.

Power Source

Black Tied

Together with Black

Red Switch Leg

Off On

OnOff

Two Speed Wiring

Tie Common Wires Together

Black Wires

Whole House Fans

Tie All Ground & Bare

Copper Wires Together

14-2 Wire

8 HOUR

4 HOUR

2 HOUR

1 HOUR

HOLD

14-2 Wire

Power Source

Black Tied

Together with Black

Red Switch Leg

Off On

OnOff

Two Speed Wiring

Tie Common Wires Together

Black Wires

Whole House Fans

Tie All Ground & Bare

Copper Wires Together

14-2 Wire

8 HOUR

4 HOUR

2 HOUR

1 HOUR

HOLD

14-2 Wire

Figure E