Installation Instructions

QUIETCOOLSYSTEMS.COM
12
2-3 Setting Up and Using the Hub
Setting up the fan is very simple. Once the wiring has been completed and the fan is plugged in, the fan is
ready to be set up.
Step One: Press the FAN button on the Hub to test that the fan works. Each button press will cycle
the fan through each speed. If you have a multi-speed fan, but the fan only goes through one
speed during testing, please check your wiring.
Step Two: Download the QuietCool Smart Control app
on your device app store. The QuietCool Smart Control
App is available on Android and iOS.
Step Three: Go into the Wi-Fi settings of your device and find the Hub’s Wi-Fi network. The network
will be displayed as (WV-XXXXXXXXXX) in the list of available Wi-Fi networks. The exact name of the
Wi-Fi network is displayed inside the Hub. The default password to connect to the Wi-Fi network is
myfan. Once connected, launch the QuietCool app.
Step Four: You will be walked through a tutorial on how to set up your fan. Once the tutorial is
finished, you will see your fan states “Setup Required”. Tap the fan.
Step Five: On the “Setup Fan Controller” page, you will set the name of your fan and the speeds.
We recommend naming the fan as the room that the fan was installed in such as “Master
Bedroom” or “Living Room”, etc. Set the speed of your fan and tap save. Both the name of the fan
and number of speeds can be set later in the Fan Settings.
NOTE: You can setup the controller in two ways, Access Point Mode or Wi-Fi Station Mode.
Each mode has its benefits. We recommend setting the Hub to Wi-Fi Station Mode to take
advantage of all features.
Access Point Mode:
Access Point Mode requires the user to select the fan from their device Wi-Fi networks everytime they
would like to control the fan. Only one person can connect to the fan at a time. This method would be used
if the user does not have a Wi-Fi router at home. This method also does not allow use of the internet while
connected to the Hub. If you select this mode, we recommend you change the default password from
myfan in the Network settings page.
Wi-Fi Station Mode:
Wi-Fi Station Mode requires the user to have a Wi-Fi router at home. In this mode the Hub is connected
directly to the Wi-Fi router in the user’s home. This allows anyone connected to the home’s Wi-Fi network
to control the fan via the QuietCool app.
Download App:
Scan this QR code to download
the QuietCool Smart Control on
your device or visit our website
at www.QuietCoolSystems.com/
support/wi-fi-smart-control