Instructions / Assembly

QUIETCOOLSYSTEMS.COM 11

WELCOME

INSTALLATION

WIRING OPERATION

WARRANTY

Ground the fan and power to the thermostat

using the green ground screw

Specialty Series Fan

Power Source

14-2 Wire

2 Wire Romex

60°

Thermostat

Low Speed

High Speed

Figure 3.1B

3.2 REMOTE THERMOSTAT WIRING

1. For this installation, you will need a 2 wire Romex, junction box, and a thermostat.

2. Open up the thermostat that is connected to the fan. Remove the power cord. Remove the bracket

mounting the thermostat to the ex tubing and remove the thermostat. Mount a junction box to

the ex tubing with the included bracket and mount the junction box. Bring your 2 wire romex from

the power source into the junction box.

3. Mount the thermostat in the best location for thermostat readings. Run a 2 wire Romex from the

junction box to the thermostat. Tape the white wire on each side of the 2 wire Romex to indicate that

it is a switch leg.

4. In the junction box, with a wire nut, tie the white common wires together. Using the green ground

screw, ground the green wire from the fan and the 2 wire Romex from the thermostat, to the junction

box.

5. High Speed: Tie the black wire from the fan to the taped white wire from the thermostat (see Figure

3.2A)

Ground the fan to the junction box