Smart Control Guide

QUIETCOOLSYSTEMS.COM

3.4 SMART CONTROL HUB - LED INDICATORS

• POWER Indicator

• The Power LED indicator will always be lit when the Hub is connected to Power.

• If this LED is not lit, check the power source.

• Temp and Hum | Timer Indicator

• This LED indicator will light up as shown below:

• Blinking: Timer Mode Active

• Solid: Smart Mode Active

• Test Indicator

• The Test LED indicator will light up as shown below when the Test button is

pressed:

• Two Speed Fan: blink three times every 2 seconds on HIGH, blink

once every 2 seconds on LOW

• Three Speed Fan: blink three times every 2 seconds on HIGH, blink

twice every 2 seconds on MED, blink once every 2 seconds on LOW

• Pair Indicator

• The Pair LED indicator will blink when making pair operations. Please see

SETTING UP YOUR FAN on page 12 for details on pairing.

• The indicator will be lit up solid when a device is connected via Bluetooth.

• The indicator will not be lit when no pairing operations are being made or no

POWER Temp and Hum

Timer

Pair Test

Speed

Bluetooth

WELCOME

INSTALLATION

WIRING OPERATION

WARRANTY