Smart Control Guide
1-888-QUIETCOOL
10
SETTING UP YOUR FAN
Once your attic fan has power, open up the QuietCool
Smart Control app. You will be taken to the Home Page.
You should see your attic fan show up in the list of available
fans.
A message indicates that setup is required. Press and hold
the Pair button on the Hub until the LED indicator begins
to blink.
NOTE: You will need to initiate this Pairing process
on each device you want to use to control your attic
fan. Once the initial device is paired, you can use the
“Enter Pair Mode” function from the app described
on page 16. This will prevent you from having to
access the Hub physically in the attic in order to
perform pairing operations.
Tap on the fan to start the setup process. Once you tap on
the fan, you will be taken to the Fan Setup page.
On this page, you will be able to change the following
settings:
• Fan Name
• Fan Model
• Serial Number
The Speeds Available section will tell you if you have
connected the fan and set your dip switch properly.
Makesurethatthisnumbermatchesthespecicationof
the fan you purchased.
In this example, we are setting up an AFG SMT PRO-2.0
which is a 2-speed fan.
The QuietCool Smart Attic Fan Control has an innovative
Smart mode that allows the fan to adjust the speed based
on the temperature and humidity conditions in your attic.
Tap Climate Settings & Presets to adjust these settings.
Within this mode there are two standard presets, Summer
and Winter. You can modify these presets and add your
own custom presets to allow quick setting changes on
they.