Owners Manual

QUIETCOOLSYSTEMS.COM
18
7. Open up the handy box on the second motorhead. Unscrew the green ground wire and detach the
green ground wire from the power cord. Remove the power cord. Reattach the green ground wire to
the handy box. Cut your green ground wire in half and strip both sides.
8. Feed the 2 wire Romex through the handy box. Make sure all wires are stripped. Then, using the
included wire nuts, tie the black wires together for high speed. Cap the red wire from the motor, as
we will not be using it on this fan. Then, tie your white common wires together. Lastly, tie your bare
copper wire and green ground wire together. (see Figure G)
Tie All Ground & Bare Copper Wires Together
Cap Red Wire
Black Wires Together
Common Wires Together
Whole House Fan
14-2 Wire
Tie All Ground & Bare Copper Wires Together
Cap Red Wire
Black Wires Together
Common Wires Together
Whole House Fan
14-2 Wire
Figure G