Owners Manual

1-888-QUIETCOOL

insert back in place, simply push it right into place, and it will snap in tight.

NOTE: Some ceiling surfaces are uneven near the grille and may cause a small gap to be

present. This can easily be caulked later if excessive.

11. Return to the attic. Using the nylon straps and the

long wood screws provided, support the duct to the

framing. This will stabilize the entire assembly. Replace

any insulation that was removed. Make sure the duct is

hanging at a nice 90 degree angle. This will ensure the

quietest operation. The installation of the fan is now

complete

NOTE: Local building codes and standards must be adhered to in the installation of this unit.

NOTE: Additional insulation can be added to the top of the damper box to provide additional

sound dampening

AVOID BACK DRAFTS: Care should be taken to avoid back drafting combustion appliances

that are installed in the conditioned space. Whole house fans are capable of pulling large

quantities of air, from the home, particularly if not enough windows are open. This could

easily back draft gas appliances located inside your home. Take care if you have gas

appliances installed inside of your home.