Specification

Application
The “Vector” recessed floor unit represents one more unique
Quiet-One 2000 solution for those hard to heat areas.
Designed to fit in a 14" x 10" floor cut out, between 16" O.C.
joists which are 10" or greater in depth, the “Vector” may be
installed either parallel to or perpendicular to the outside wall.
This flexibility in a self contained unit which can deliver up to
10,600 BTU/hr. is perfect for areas with sliding glass doors,
window walls, or sun porches as well as other areas where
wall space is at a premium.
The Vector’s tough aluminum architecture style floor grille
with beveled edges and an attractive satin anodized finish, will
lend an added touch of elegance to any decor.
Engineering Specifications
Construction. The “Vector” (FL100) floor unit consists of a
one piece chassis of high grade (.036") zinc coated steel with
all components completely preassembled.
Floor Grille. The “Vector” grille has a tough aluminum frame
with a central removable core. The frame dimensions are
15
5
⁄8" x 11
3
⁄4" x
3
⁄16" thick while the core is 13
1
⁄8" x 9
1
⁄4" x
7
⁄8" deep.
The grille is vertically adjustable up to
1
⁄
2". The adjustable
feature plus the 2
1
⁄2" frame all around gives the installer the
flexibility to mount the grille to any floor covering.
Heat Exchanger. Highly efficient dual circuited headered
coil, made of copper alloy tubes brazed with lead free solder
and expanded into smooth aluminum plate fins (10FPI), tested
to 300psi, and sealed for quality. The heat exchanger is posi-
tioned in the unit for maximum heat transfer across the coil.
Fan and Motor Assembly. High spec tangential SEL fan
and motor assembly consists of high static fan wheel and
scroll, detachable motor, replaceable “easy glide” sleeve
bearings, and the fan and motor cut out are protected to
UL/CSA specifications. This fan and motor assembly is
designed to run whisper quiet without vibration.
Controls. The “Vector” has an integral two speed max.-off-
min. fan switch (optional wall mounted fan speed controller is
available) which is located on the chassis below the grille core.
Simply set the switch speed and the unit will operate
automatically. The LTC – low limit aquastat is also a high spec
item with a close tolerance designed to close on a rise to
130°F+/-3°F and open at 110°F+/-3°F. For low temperature
systems you will have to change out the aquastat located in
the main electrical box easily removed from its hold on clip.
Water Connections. Supply and return connections are
1
⁄2" (
5
⁄8" O.D.) sweat connections. A water vent with a wide
convenient screwdriver slot is located on the return and is
accessible under the grille core.
Electrical Connections. 120/60/1 power supply is required.
All that’s necessary is to knock out the junction box hole you
want to use and wire to the L1 and L2 leads. There is a
convenient one screw access plate on the
unit to get at the ground.
• Aquastat set to close on a rise to 130°F and open at 110°F.
•Max. speed = 85 CFM; min. speed = 65 CFM.
FL100 - Recessed Floor Unit
Design
The Quiet-One 2000 “Vector” is a complete fan con-
vector unit designed for hard to heat areas. Its operation is
whisper quiet as well as efficient. The grille is attractive and
practical as well, having a heel proof design. It is easily
mounted and completely accessible.
“Vector” (FL100) BTU/Hr Outputs
MODEL FL100
KICKSPACE HEATER SERIES Recessed Floor Unit
SUBMITTAL DATA INFORMATION
Supercedes 5/1/95
“
VECTOR
”
ENVIRONMENTAL PRODUCTS
1875 Dewey Avenue, Benton Harbor, MI 49023 • [phone]