Product Brochure

Vector Floor Unit
by Smith’s Environmental Products
FL 100 Floor Unit
Whisper Quiet And Ecient Operation
VECTOR FLOOR
BY SMITH’S ENVIRONMENTAL PRODUCTS
Application
The “Vector” recessed oor unit represents one more unique Quiet-One 2000 solution for those
hard to heat areas. Designed to t in a 14" x 10" oor cut out, between 16" O.C. joists which are
10" or greater in depth, the “Vector” may be installed either parallel to or perpendicular to the
outside wall. This exibility in a self contained unit which can deliver up to 10,600 BTU/hr. is
perfect for areas with sliding glass doors, window walls or sun porches.
The Vector’s tough aluminum architecture style oor grille with beveled edges and an attractive
satin anodized nish, will lend an added touch of elegance to any decor.
Engineering Specications
Construction. The “Vector” (FL100) oor unit consists of a one piece chassis of high grade (.036")
zinc coated steel with all components completely preassembled.
Floor Grille. The “Vector” grille has a tough aluminum frame with a central removable core.
The frame dimensions are 15 5 ⁄8" x 11 3 ⁄4" x 3 ⁄16" thick while the core is 13 1 ⁄8" x 9 1 ⁄4" x 7 ⁄8"
deep. The grille is vertically adjustable up to 1 ⁄2". The adjustable feature plus the 2 1 ⁄2" frame
all around gives the installer the exibility to mount the grille to any oor covering.
Heat Exchanger. Highly ecient dual circuited headered coil, made of copper alloy tubes brazed with lead free solder and expanded into
smooth aluminum plate ns (10FPI), tested to 300psi, and sealed for quality. It’s positioned in the unit for maximum heat transfer across the coil.
Fan and Motor Assembly. High spec tangential EBM fan and motor assembly consists of high static fan wheel and scroll, detachable motor,
replaceable “easy glide” sleeve bearings, and the fan and motor cut out are protected to UL/CSA specications. This fan and motor assembly
is designed to run whisper quiet without vibration.
Water Connections. Supply and return connections
are 1 ⁄2" (5 ⁄8" O.D.) sweat connections. A water vent
with a wide convenient screwdriver slot is located on
the return and is accessible under the grille core.
Electrical Connections. 120/60/1 power supply is
required. All that’s necessary is to knock out the
junction box hole you want to use and wire to the
L1 and L2 leads. There is a convenient one screw
access plate on the unit to get at the ground.
Design. The Quiet-One 2000 “Vector” is a complete fan convector unit designed for hard to heat areas. Its operation is whisper quiet as well as
ecient. The grille is attractive and practical as well, having a heel proof design. It is easily mounted and completely accessible.
Controls. The “Vector” has an integral two speed max-o-min. fan switch (optional wall mounted fan speed controller is available) which is
located on the chassis below the grille core. Simply set the switch speed and the unit will operate automatically. The LTC – low limit aquastat is
also a high spec item with a close tolerance designed to close on a rise to 110°F+/-3°F and open at 90°F+/-3°F. For low temperature systems
you will have to change out the aquastat located in the main electrical box easily removed from its hold on clip.
ENVIRONMENTAL PRODUCTS
300 Pond St., Randolph, MA 02368 | [phone] | Fax [phone] | www.SmithsEP.com
130° 140° 150° 160° 170° 180° 190° 200°
ma x 4049 5208 5864 6750 7674 8788 9386 10174
mi n 2808 3571 4074 4704 5346 6118 6531 7170
ma x 4168 5266 6028 6887 7815 8935 9561 10386
mi n 2901 3649 4204 4810 5458 6234 6671 7293
ma x 4287 5325 6192 7024 7957 9081 9736 10598
mi n 2994 3727 4334 4915 5570 6350 6810 7415
ma x 4330 5343 6270 7109 8149 9128 10007 10716
mi n 3027 3741 4375 4978 5721 6462 7025 7505
FL 100 VECTOR | BTU/HR @ 65° ENTERING AIR
Uni t
Flow Rate
GPM
Press .
Drop (Ft)
Fan
Spe
ed
ENTERI NG WATER TEMPERATURE (DEGREE F.) BTU/HR
1
2
3
4
FL 100
0.027
0.093
0.191
0.473
~ Aquastat set to close on a rise to 110°F and open at 90°F
~ Max speed = 85 CFM; min speed = 65 CFM