Instructions / Assembly

ManualsBrandsQuiet Glide ManualsBuilding materialsBronze Braking Rolling Hook Ladder Hardware Kit for 20 in. W Ladders

• Quiet Glide Rolling Ladders

WIDE 20” ladder

Determine what type of

Ladder Hardware Kit

you will need.

Here is an easy way to order your Hardware Kits

Hardware Kit includes:

• Top Roller Guides (2)

• Bottom Rollers (2)

• Rung support kits (7) enough for 8’ ladder

• Fasteners

Black

Hammered

Antique Brass

Pattern may vary

Oil Rubbed

Bronze

Satin Nickel

BRAKE

WHEEL

Ladder Hardware Kit

you will need.

Ladder Hardware Kit

you will need.

Ladder Hardware Kit

• Rung support kits (7) enough for 8’ ladder

Spring loaded wheel locks when weight is applied on the ladder,

wheel unlocks when weight is taken o .

Brake tension can be

adjusted with allen

wrench.

STANDARD

HEEL

20” WIDE Ladder Hardware Kits with standard wheel

Part# Description Finish

QG.200-20.08 Rolling Black

QG.200-20.03* Rolling Hammered Antique Brass

QG.200-20.07 Rolling Oil Rubbed Bronze

QG.200-20.02 Rolling Satin Nickel

QG.500-20.08 Rolling Hook ** Black

QG.500-20.03* Rolling Hook ** Hammered Antique Brass

QG.500-20.07 Rolling Hook ** Oil Rubbed Bronze

QG.500-20.02 Rolling Hook ** Satin Nickel

QG.700-20.08 Swivel** Black

QG.700-20.03* Swivel** Hammered Antique Brass

QG.700-20.07 Swivel** Oil Rubbed Bronze

QG.700-20.02 Swivel** Satin Nickel

* Finish Pattern may vary **Patent Pending

20” WIDE Ladder Hardware Kits with lower brake wheel

Part# Description Finish

QG.210-20.08 Rolling Black

QG.210-20.03* Rolling Hammered Antique Brass

QG.210-20.07 Rolling Oil Rubbed Bronze

QG.210-20.02 Rolling Satin Nickel

QG.510-20.08 Rolling Hook ** Black

QG.510-20.03* Rolling Hook ** Hammered Antique Brass

QG.510-20.07 Rolling Hook ** Oil Rubbed Bronze

QG.510-20.02 Rolling Hook ** Satin Nickel

QG.710-20.08 Swivel** Black

QG.710-20.03* Swivel** Hammered Antique Brass

QG.710-20.07 Swivel** Oil Rubbed Bronze

QG.710-20.02 Swivel** Satin Nickel

* Finish Pattern may vary **Patent Pending

NEW

Features:

• Increased Stability

• Aesthetically Prominent

Summary of content (8 pages)

PAGE 1
• Quiet Glide Rolling Ladders WIDE 20” ladder NEW Here is an easy way to order your Hardware Kits Determine what type of Ladder Hardware Kit you will need.
PAGE 2
• Quiet Glide Rolling Ladders WIDE 20” ladder NEW 1C 20” WIDE Ladder Hardware Kits with contemporary wheel Part# Description Finish QG.220-20.08 QG.220-20.03* QG.220-20.07 QG.220-20.02 Rolling Rolling Rolling Rolling Black Hammered Antique Brass Oil Rubbed Bronze Satin Nickel QG.520-20.08 QG.520-20.03* QG.520-20.07 QG.520-20.02 Rolling Hook ** Rolling Hook ** Rolling Hook ** Rolling Hook ** Black Hammered Antique Brass Oil Rubbed Bronze Satin Nickel QG.720-20.08 Swivel** QG.720-20.
PAGE 3
• Quiet Glide Rolling Ladders WIDE 20” ladder NEW Select how many Vertical or Horizontal Brackets for your rail you will need (choose correct bracket for Rolling, Swivel or Rolling Hook application) You will need 1 bracket for every 32” or 4 brackets for an 8ft rail Vertical Rail Bracket Kit Part# Description QG.201.08 QG.201.03* QG.201.07 QG.201.02 QG.301.08 Rolling/ Swivel bracket Rolling/ Swivel bracket Rolling/ Swivel bracket Rolling/ Swivel bracket Rolling Hook Vertical Brackets Finish QG.
PAGE 4
• Quiet Glide Rolling Ladders NEW WIDE 20” ladder 3 Select the wood ladder and accessories 3A WIDE Ladder-in stock (includes top turned rung) 20” wide ladders Species Part# 8ft Part# 9ft Part# 10ft Red Oak QG.6008-20.RO QG.6009-20.RO QG.6010-20.RO Maple QG.6008-20.MA QG.6009-20.MA QG.6010-20.MA Cherry QG.6008-20.CH QG.6009-20.CH QG.6010-20.CH Walnut QG.6008-20.WA QG.6009-20.WA QG.6010-20.
PAGE 5
GENERAL INSTALLATION/SPECIFICATION GUIDE Please Note!! Step 1: Rail Installation Tools Required For Assembly 4mm & 5mm allen wrenches. #2 Phillips & #2 Square screw driver. 1/4” x 20 thread tap. 1/4” Drill bit (A) Slide brackets into rail, recommended maximum spacing 32 inches apart. Pre-drill holes in wood if needed and screw brackets in place.
PAGE 6
Top Ladder Hardware Top Roller Rolling Hook 7/8” 4” CC 5-1/2” Patent Pending on Rolling Hoo k Top Hardware 2-1/8” dia 6-1/2” 4” CC 5-1/2” 1-3/4” 5-1/2” 7/8” 6-1/2” 2-1/2” 2” dia Patent Pending 4” 1-3/4” Bottom Ladder Hardware Standard Wheel Brake Wheel 1-3/8” 1-7/16” 5” 8-1/4” 8” Contemporary Wheel 1-3/4” 7/8” 7/8” 7/8” 5-3/8” 6-1/8” 5-7/8” Rail Height and distance for 8’, 9’, 10’ standard ladders Hand Rail dimensions 7” 45°angle (approximately) 5” radius to floor Stock =
PAGE 7
Curved rail radius dimensions 1-3/8” Hook top Hardware cannot be used with curved rails! Bracket Splice kit Rail Diameter = 1” 90° Bracket Rail Height & Ladder Distanc Rail Bracket - Vertical Roller type Upper Roller Guide only s R 0” u di a 7/8” Rail heights ( center of Rail ) 3 2”CC 2-5/8” Straight section of curved rail 103” 6” Protrusion 2-3/8” 91” 23/32” 38” Rail Bracket - Vertical Hook or Rolling Hook type Upper Hook Guide only 9’ 10’ 19.
PAGE 8
Make your own Ladder To determine length of ladder: Measure from the center of rail to the ﬂoor, then add ﬁve inches to the measurement. 19-3/8” OA - 18-3/8” inside 1-1/4” Dia. Taper to 1-1/8” Dia. 7/8” Dia through ladder.