Installation Guide

7
115”
103”
91”
20.5”
21.7”
Rail heights
( center of Rail )
Distance from wall ( ladder in climbing position )
19.35”
8 ’
10’
9’
Rail Height & Ladder Distance
Rev 1-5-09
Splice kit
14 -1/2”
1-3/8”
6”
Bracket
38”
30” Radius
Bracket
Curved rail radius dimensions
Hook top Hardware cannot be used with curved rails!
90°
3 -7/8”
30” Radius
28-3/4”
Bracket
Bracket
Splice kit
21”
135°
23/32”
2-1/16”CC
2-11/16”
Protrusion
1-7/8”
1-3/4”
15/16”
Rail Bracket - Vertical
Hook or Rolling Hook type
23/32”
2”CC
2-5/8”
Protrusion
2-3/8”
1-3/4”
7/8”
Rail Bracket - Vertical Roller type
15/16”
1-1/4”
7/8”
1-7/8”
2-3/8”
Rail Bracket
Horizontal Roller type
Upper Roller Guide only
47”
7”
45°angle (approximately)
5” radius
Stock = 1-1/4” x 1-1/4”
with 3/16” radius corners
5/8” radius ends
2- Predrilled holes 17/64”
2-1/8”CC on each end
located 3/4” from end
47”
7”
2-1/8”CC
3/4”
Hand Rail dimensions
Upper Roller Guide only
Upper Hook Guide only
Straight section
of curved rail
Straight section
of curved rail
Patent Pending
7
11/16”
7/8”
CC
5/8”
1-3/4”
1-7/8”
1”
Center of Rail
Bottom of
Horizontal Bracket
Rail Bracket - Horizontal
Rolling Hook type
Rail Diameter = 1”