Specification

2
Step 1: Rail Installation
Special application notes:
• Leave at least 7” of clearance between the center of the rail and the ceiling, crown
moulding or other overhanging protrusions when the ladder is in the stored position (close to
the wall/cabinet/bookshelf).
• In the climbing position, a minimum 3” clearance between the center of the rail and any
upper cabinet doors is required. This will enable the doors to be opened when the ladder is in
front of the doors.
• Do not mount rail brackets directly onto a drywall surface. Always mount these brackets
to solid wood, predrilling the holes in the wood is advisable to avoid splitting the wood.
1. Once the height of where the center of the rail is to be installed is established, mark the
location on the wood surface where the bottom of the mounting bracket will be located.
(The distance between the center of the rail and the bottom of the bracket is different for
different brackets. See the bracket dimensional specs below for proper measurements).
Verify with a quality leveling device that the horizontal locations of the brackets are level
and true.
Quiet Glide Double-Hook style Hardware Installation Instructions
Revision date: 7/24/2019
Horizontal Hook
Horizontal Roller
Vertical Hook
Vertical Roller