User guide

System Logging Commands
6-17
6
logging host
This command specifies a syslog server host that will receive logging messages.
Use the no form to remove syslog server host.
Syntax
logging host <host_name | host_ip_address>
no logging host
• host_name - The name of a syslog server.
(Range: 1-20 characters)
• host_ip_address - The IP address of a syslog server.
Default Setting
None
Command Mode
Global Configuration
Example
logging console
This command initiates logging of error messages to the console. Use the no form
to disable logging to the console.
Syntax
logging console
no logging console
Default Setting
Disabled
Command Mode
Global Configuration
Example
Outdoor Bridge(config)#logging host 10.1.0.3
Outdoor Bridge(config)#
Outdoor Bridge(config)#logging console
Outdoor Bridge(config)#