User guide

Command Line Interface
6-10
6
show line
This command displays the console port’s configuration settings.
Command Mode
Exec
Example
The console port settings are fixed at the values shown below.
System Management Commands
These commands are used to configure the user name, password, browser
management options, and a variety of other system information.
Outdoor Bridge#show line
Console Line Information
======================================================
databits : 8
parity : none
speed : 9600
stop bits : 1
======================================================
Outdoor Bridge#
Command Function Mode Page
Country Setting
country Sets the wireless bridge country code for correct radio
operation
Exec 6-11
Device Designation
prompt Customizes the command line prompt GC 6-12
system name Specifies the host name for the wireless bridge GC 6-12
snmp-server contact Sets the system contact string GC 6-24
snmp-server location Sets the system location string GC 6-26
User Access
username Configures the user name for management access GC 6-13
password Specifies the password for management access GC 6-13
Web Server
ip http port Specifies the port to be used by the web browser interface GC 6-14
ip http server Allows the wireless bridge to be monitored or configured from
a browser
GC 6-14
System Status
show system Displays system information Exec 6-15
show version Displays version information for the system Exec 6-15