User guide

v
Contents
Chapter 1: Introduction 1-1
Package Checklist 1-1
Hardware Description 1-2
Component Description 1-2
System Configuration 1-5
System Components 1-5
Point-to-Point Configuration 1-5
Point-to-Multipoint Configuration 1-5
Features and Benefits 1-6
System Defaults 1-7
Chapter 2: Bridge Link Planning 2-1
Data Rates 2-1
Radio Path Planning 2-2
Antenna Height 2-3
Antenna Position and Orientation 2-4
Radio Interference 2-5
Weather Conditions 2-5
Ethernet Cabling 2-6
Grounding 2-6
Chapter 3: Hardware Installation 3-1
Testing Basic Link Operation 3-1
Mount the Unit 3-1
Using the Pole-Mounting Bracket 3-1
Using the Wall-Mounting Bracket 3-3
Connect the External Antenna 3-4
Connect Cables to the Unit 3-5
Connect the Power Injector 3-5
Align Antennas 3-6
Chapter 4: Initial Configuration 4-1
Initial Setup through the CLI 4-1
Initial Configuration Steps 4-2
Using the Web-based Management Setup Wizard 4-3
Chapter 5: System Configuration 5-1
Advanced Configuration 5-1
System Identification 5-2
TCP / IP Settings 5-3
Filter Control 5-6