User guide

System Configuration
5-24
5
CLI Commands for STP – The following example configures spanning tree
paramters for the bridge and wireless port 5.
Outdoor Bridge(config)#bridge stp-bridge priority 40000 6-36
Outdoor Bridge(config)#bridge stp-bridge hello-time 5 6-35
Outdoor Bridge(config)#bridge stp-bridge max-age 38 6-35
Outdoor Bridge(config)#bridge stp-bridge forward-time 20 6-34
Outdoor Bridge(config)#no bridge stp-port spanning-disabled 5 6-39
Outdoor Bridge(config)#bridge stp-port priority 5 0 6-37
Outdoor Bridge(config)#bridge stp-port path-cost 5 50 6-37
Outdoor Bridge(config)#no bridge stp-port portfast 5 6-38
Outdoor Bridge(config)#end
Outdoor Bridge#show bridge 6-39
Bridge Information
=================================================
Media Type | Age Time(sec)|
=================================================
EtherNet | 300 |
WLAN_A | 1000 |
==================================================
Bridge Id : 32768.037fbef192
Root Bridge Id : 32768.01f47483e2
Root Path Cost : 25
Root Port Id : 0
Bridge Status : Enabled
Bridge Priority : 40000
Bridge Hello Time : 5 Seconds
Bridge Maximum Age : 38 Seconds
Bridge Forward Delay: 20 Seconds
============================= Port Summary =============================
Id| Priority | Path Cost | Fast Forward | Status | State |
0 128 25 Enable Enabled Forwarding
Outdoor Bridge#