User guide

System Configuration
5-20
5
CLI Commands for Bridging – The following example shows how to set the MAC
address aging time for the wireless bridge.
Outdoor Bridge(config)#bridge timeout 0 300 6-33
Outdoor Bridge(config)#bridge timeout 2 1000 6-33
Outdoor Bridge(config)#exit
Outdoor Bridge#show bridge 6-39
Bridge Information
=================================================
Media Type | Age Time(sec)|
=================================================
EtherNet | 300 |
WLAN_A | 1000 |
==================================================
Bridge Id : 32768.037fbef192
Root Bridge Id : 32768.01f47483e2
Root Path Cost : 25
Root Port Id : 0
Bridge Status : Enabled
Bridge Priority : 32768
Bridge Hello Time : 2 Seconds
Bridge Maximum Age : 20 Seconds
Bridge Forward Delay: 15 Seconds
============================= Port Summary =============================
Id| Priority | Path Cost | Fast Forward | Status | State |
0 128 25 Enable Enabled Forwarding
Outdoor Bridge#