User guide

System Configuration

5-8

SNMP – Enables or disables SNMP management access and also enables the

wireless bridge to send SNMP traps (notifications). SNMP management is enabled

by default.

Community Name (Read Only) – Defines the SNMP community access string that

has read-only access. Authorized management stations are only able to retrieve

MIB objects. (Maximum length: 23 characters, case sensitive; Default: public)

Community Name (Read/Write) – Defines the SNMP community access string that

has read/write access. Authorized management stations are able to both retrieve

and modify MIB objects. (Maximum length: 23 characters, case sensitive;

Default: private)

Trap Destination IP Address – Specifies the recipient of SNMP notifications. Enter

the IP address or the host name. (Host Name: 1 to 20 characters)

Trap Destination Community Name – The community string sent with the notification

operation. (Maximum length: 23 characters; Default: public)