User guide

Using the Web-based Management Setup Wizard

4-5

1. Radio Channel – You must enable radio communications for the 802.11a radio

and set the operating channel.

• 802.11a

Turbo Mode – If you select Enable, the wireless bridge will operate in turbo

mode with a data rate of up to 108 Mbps. Normal mode supports 13 channels,

Turbo mode supports only 5 channels. (Default: Disable)

802.11a Radio Channel – Set the operating radio channel number. (Default:

56ch, 5.280 GHz)

Auto Channel Select – Select Enable for automatic radio channel detection.

(Default: Enable)

Note: Available channel settings are limited by local regulations which determine which

channels are available. (See “Maximum Channels” on page B-1.)