User guide

Wireless Interface Commands
6-57
6
Example
show interface wireless
This command displays the status for the wireless interface.
Syntax
show interface wireless a
• a - 802.11a radio interface.
Command Mode
Exec
Example
Outdoor Bridge(if-wireless a)#shutdown
Outdoor Bridge(if-wireless a)#
Outdoor Bridge#show interface wireless a
Wireless Interface Information
=========================================================
----------------Identification-----------------------------
Description : Enterprise 802.11a Access Point
Turbo Mode : OFF
Channel : 36
Status : Enable
Service type : WDS
----------------802.11 Parameters--------------------------
Transmit Power : FULL (15 dBm)
Max Station Data Rate : 54Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
DTIM Interval : 2 beacons
----------------Security-----------------------------------
Encryption : 128-BIT AES ENCRYPTION
AES Key type : Alphanumeric
=========================================================
Outdoor Bridge#