User guide

Wireless Interface Commands
6-47
6
Example
Wireless Interface Commands
The commands described in this section configure connection parameters for the
wireless interface.
Outdoor Bridge#show interface ethernet
Ethernet Interface Information
========================================
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.253
Primary DNS : 192.168.1.55
Secondary DNS : 10.1.0.55
Admin status : Up
Operational status : Up
========================================
Outdoor Bridge#
Command Function Mode Page
interface wireless Enters wireless interface configuration mode GC 6-48
description Adds a description to the wireless interface IC-W 6-48
speed Configures the maximum data rate at which a station
can connect to the wireless bridge
IC-W 6-49
channel Configures the radio channel IC-W 6-49
turbo Configures turbo mode to use faster data rate IC-W 6-50
beacon-interval Configures the rate at which beacon signals are
transmitted from the wireless bridge
IC-W 6-50
dtim-period Configures the rate at which stations in sleep mode
must wake up to receive broadcast/multicast
transmissions
IC-W 6-51
fragmentation-length Configures the minimum packet size that can be
fragmented
IC-W 6-52
rts-threshold Sets the packet size threshold at which an RTS must be
sent to the receiving station prior to the sending station
starting communications
IC-W 6-52
encryption Defines whether or not WEP or AES encryption is used
to provide privacy for wireless communications
IC-W 6-53
key Sets the keys used for WEP or AES encryption IC-W 6-54
transmit-key Sets the index of the key to be used for WEP encryption IC-W 6-55
transmit-power Adjusts the power of the radio signals transmitted from
the wireless bridge
IC-W 6-56
shutdown Disables the wireless interface IC-W 6-56
show interface wireless Shows the status for the wireless interface Exec 6-57