User guide

Bridge Commands
6-39
6
bridge stp-port spanning-disabled
This command disables the Spanning Tree Protocol for the specified interface. Use
the no form to reenable the Spanning Tree Protocol for the specified interface.
Syntax
bridge stp-port spanning-disabled <port>
no bridge stp-port spanning-disabled <port>
port - Specifies the port number on the wireless bridge. (Range: 0,
Ethernet interface; 1-16 wireless interface)
Default Setting
Enabled
Command Mode
Global Configuration
Example
This example disables the Spanning Tree Protocol for port 5.
show bridge
This command displays aging time and spanning tree settings for the Ethernet and
wireless interfaces.
Syntax
show bridge
Command Mode
Exec
Outdoor Bridge(config)#bridge stp-port spanning-disabled 5
Outdoor Bridge(config)#