User guide

Flash/File Commands
6-27
6
Example
Flash/File Commands
These commands are used to manage the system code or configuration files.
bootfile
This command specifies the image used to start up the system.
Syntax
bootfile <filename>
filename - Name of the image file.
Default Setting
None
Command Mode
Exec
Command Usage
• The file name should not contain slashes (\ or /), the leading letter of the file
name should not be a period (.), and the maximum length for file names is
32 characters. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”)
• If the file contains an error, it cannot be set as the default file.
Outdoor Bridge#show snmp
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : WC-19
Contact : Paul
Traps : Enabled
Host Name/IP : 10.1.19.23
Trap Community : *****
=============================================
Outdoor Bridge#
Command Function Mode Page
bootfile Specifies the file or image used to start up the system Exec 6-27
copy Copies a code image or configuration between flash memory
and a FTP/TFTP server
Exec 6-28
delete Deletes a file or code image Exec 6-29
dir Displays a list of files in flash memory Exec 6-30