User guide

Command Line Interface
6-26
6
Command Mode
Global Configuration
Command Usage
The snmp-server host command is used in conjunction with the
snmp-server enable server command to enable SNMP notifications.
Example
Related Commands
snmp-server enable server (6-25)
snmp-server location
This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location.
(Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact (6-24)
show snmp
This command displays the SNMP configuration settings.
Command Mode
Exec
Outdoor Bridge(config)#snmp-server host 10.1.19.23 batman
Outdoor Bridge(config)#
Outdoor Bridge(config)#snmp-server location building-1
Outdoor Bridge(config)#