Installation manual

Command Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 4 Voice VLAN Configuration Commands
Huawei Technologies Proprietary
4-2
Parameter
None
Description
Using the display voice vlan status command, you can display the relative Voice
VLAN features including the Voice VLAN status, the configuration mode, and the
current Voice VLAN port status, and so on
For related commands, see voice vlan vlan_id enable and voice vlan enable.
Example
# Enable the Voice VLAN on VLAN 2 and display the Voice VLAN status.
<Quidway>system-view
System View: return to User View with Ctrl+Z.
[Quidway] display voice vlan status
Voice Vlan status: ENABLE
Voice Vlan ID: 2
Voice Vlan security mode: Security
Voice Vlan aging time: 100 minutes
Current voice vlan enabled port mode:
PORT MODE
--------------------------------
Ethernet0/12 AUTO
Ethernet0/13 MANUAL
4.1.3 voice vlan aging
Syntax
voice vlan aging minutes
undo voice vlan aging
View
System view
Parameter
minutes: The aging time of Voice VLAN, in minute, ranging from 5 to 43200. The
default value is 1440 minutes.
Description
Using the voice vlan aging command, you can set the aging time of Voice VLAN.
Using the undo voice vlan aging command, you can set the aging time back to the
default.