Installation manual

Command Manual - VLAN
Quidway S3000-EI Series Ethernet Switches Chapter 2 Isolate-User-Vlan Configuration Commands
Huawei Technologies Proprietary
2-4
2.1.4 isolate-user-vlan igsp enable
Syntax
isolate-user-vlan igsp enable
undo isolate-user-vlan igsp enable
View
VLAN view
Parameter
igsp: Enable IGSP ( IGMP Snooping Protocal ).
Description
Use the isolate-user-vlan igsp command to cause IGMP packets to be sent to the
route interface with Secondary VLAN IDs.
Use the undo isolate-user-vlan igsp command to restore the default VLAN ID of
IGMP packets to be sent to the route interface.
By default, IGMP packets are sent with isolate-user-vlan ID.
Example
# Causes IGMP packets to be sent with Secondary VLAN IDs in VLAN5.
[Quidway-vlan5] isolate-user-vlan igsp enable