Installation manual

Command Manual - Port
Quidway S3000-EI Series Ethernet Switches Chapter 1 Ethernet Port Configuration Commands
Huawei Technologies Proprietary
1-20
1.1.25 shutdown
Syntax
shutdown
undo shutdown
View
Ethernet port view
Parameter
none
Description
Using shutdown command, you can disable the Ethernet port. Using undo shutdown
command, you can enable the Ethernet port.
By default, the Ethernet port is enabled.
Example
# Enable Ethernet port Ethernet0/1.
[Quidway-Ethernet0/1] undo shutdown
1.1.26 speed
Syntax
z For 100M Ethernet port, this command is in the following format:
speed { 10 | 100 | auto }
z For 1000M Ethernet port, this command is in the following format:
speed { 10 | 100 | 1000 | auto }
z The undo form of this command is:
undo speed
View
Ethernet port view
Parameter
10: The speed on the port is 10Mbps.
100: The speed on the port is 100Mbps.
1000: The speed on the port is 1000Mbps.
auto: The port speed is in peer auto-negotiation status.